Features
- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink
- Hot Pluggable
- IEEE 802.3ab 1000Base-T Compliant
- Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712
Description
D-Link's DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.
Specifications
| Technical Specifications |
| Standard |
IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
| Transceiver Type |
SFP (Small Form Pluggable) |
| Connector |
RJ-45 |
| Auto MDI/MDIX |
Automatic crossover detection enabled |
| External crossover cable not required |
| Data Rate |
1,000 Mbps (IEEE 802.3 compatible) |
| 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only |
| Cable Type |
Cat. 5 twisted-pair cable |
| Maximum Cable Distance Coverage |
100 meters |
| Supply Current |
350mA (typical) |
| 400mA (maximum) |
| 1.3W max power over full range of voltage and temperature |
| Input Voltage |
3.1V (minimum) |
| 3.3V (typical) |
| 3.5V (maximum) |
| Referenced to GND |
| Surge Current |
30mA |
| Hot plug above steady state current |
| Operating Temperature |
32° to 185° F (0° to 85° C) |
| Storage Temperature |
-40° to 185° F (-40° to 85° C) |
| Waranty |
2 Years |
| Ordering Information |
| Part Number |
DGS-712 |
| Description |
1000BASE-T Copper SFP Transceiver |